General Finishes Enduro 2K White and Clear poly are two-component water-based polyurethanes for professionals looking for the highest durability and ease of use.

This item is on closeout and returns are not accepted!

This 2k polyurethane is suitable for interior/exterior applications on new or existing cabinets, woodwork, furniture, steel, or even fiberglass. 

Each gallon includes 12.8 ounces of NCO Catalyst and free 2-3 day shipping. 

General Finishes 2k poly can be sprayed through a variety of different spray equipment including: air assisted airless, flatline, HVLP, and airless.

If using an HVLP sprayer, it is recommended thin the product with Enduro Extender to get the right consistency. 

Features:

• Fast dry (30 minutes to 2 hours - depending on heat and airflow)
• Fast build
• High chemical & water resistance
• Excellent adhesion on multiple substrates (painted surfaces, fiberglass, raw wood, bar tops)

Surface Prep

Raw wood: Sand no finer than 220-grit. Adheres to raw wood without a primer.

Prefinished wood and sealed surfaces: Clean surface with
50/50 mixture of denatured alcohol and water with maroon non-woven abrasive pad. Prime surface with Enduro White Undercoat, or Enduro Stain Blocker.

Fiberglass and pre-primed steel: Can be used with proper preparation & priming. 

Always test first.

Mixing instructions and pot life

1. Mix thoroughly to reincorporate solids.
2. Slowly add 10% Enduro NCO Catalyst by volume (3.2 oz. per qt.; 12.8 oz. per gal.) to Enduro Tintable 2K White Poly while mixing; 2-3 minutes with a power drill.
3. Let rest 15 minutes.
4. Strain with fine-mesh filter - Pot life is 4 hours (colorant dosage may change this)