General Finishes Enduro 2K Poly

General Finishes SKU: B793-L
General Finishes Enduro Clear Poly Flat Gallon
General Finishes Enduro Clear Poly Satin Gallon
General Finishes Enduro Clear Poly Semi-Gloss Gallon
General Finishes Enduro 2K Poly
General Finishes Enduro 2K Poly
General Finishes Enduro 2K Poly

General Finishes Enduro 2K Poly

General Finishes SKU: B793-L
Regular price $ 169.99 Sale price $ 134.99 Save $ 35
  • Free shipping!
  • Same day shipping before 1PM EST
  • Low stock - 2 items left
  • Inventory on the way

General Finishes Enduro 2K White and Clear poly are two-component water-based polyurethanes for professionals looking for the highest durability and ease of use.

This item is on closeout and returns are not accepted!

This 2k polyurethane is suitable for interior/exterior applications on new or existing cabinets, woodwork, furniture, steel, or even fiberglass. 

Each gallon includes 12.8 ounces of NCO Catalyst and free 2-3 day shipping. 

General Finishes 2k poly can be sprayed through a variety of different spray equipment including: air assisted airless, flatline, HVLP, and airless.

If using an HVLP sprayer, it is recommended thin the product with Enduro Extender to get the right consistency. 


  • Fast dry (30 minutes to 2 hours - depending on heat and airflow)
  • Fast build
  • High chemical & water resistance
  • Excellent adhesion on multiple substrates (painted surfaces, fiberglass, raw wood, bar tops)

Surface Prep

Raw wood: Sand no finer than 220-grit. Adheres to raw wood without a primer.

Prefinished wood and sealed surfaces: Clean surface with
50/50 mixture of denatured alcohol and water with maroon non-woven abrasive pad. Prime surface with Enduro White Undercoat, or Enduro Stain Blocker.

Fiberglass and pre-primed steel: Can be used with proper preparation & priming. 

Always test first.

Mixing instructions and pot life

  1. Mix thoroughly to reincorporate solids.
  2. Slowly add 10% Enduro NCO Catalyst by volume (3.2 oz. per qt.; 12.8 oz. per gal.) to Enduro Tintable 2K White Poly while mixing; 2-3 minutes with a power drill.
  3. Let rest 15 minutes.
  4. Strain with fine-mesh filter - Pot life is 4 hours (colorant dosage may change this)

Orders are shipped the same day Monday through Friday when ordered before 1:00PM EST. 

Depending on order volume, custom colors may not ship when ordered before 1PM. Current order cutoff time for custom colors is 11AM EST. Custom color order cut off time is updated daily and can be found in the announcement at the top of every page.

Some orders will ship the same day after 1:00PM EST but there is a firm cutoff time of 5:30PM. Accurate estimated delivery dates are shown at checkout for most products.

All orders over $199 ship free. Click here for more detailed shipping information.

The following products are ground only: TWP deck stain, Arborcoat oil based stain, Simiron epoxy, most 5 gallon pails, tabletop epoxy, dry erase paints, airless paint sprayers, Benjamin Moore deck cleaning products, and all oil based gel/wiping stains, topcoats, and paints.

All items are packed thoroughly to avoid damage. We have not had a damaged gallon in all of 2023.

For any questions on shipping or products you can call us at 855-672-0422 start, a live chat session, or send us an email at

We try to respond to emails in less than 1 hour, and have the live chat available as often as possible. Retail store hours are M-F 8AM to 5PM EST and Saturday 9AM to 3PM EST.

Customer Reviews

Be the first to write a review
General Finishes High Performance Quart Flat
General Finishes High Performance Quart Satin
General Finishes High Performance Water Based Topcoat
General Finishes
from $ 38.99
General Finishes Arm-R-Seal Oil Based Topcoat Satin Quart
General Finishes Arm-R-Seal Oil Based Topcoat Semi-Gloss Quart
General Finishes Arm R Seal Oil Based Topcoat
General Finishes
$ 33.99
Recently viewed