Centurion 1123 is a universal single component blocking and bonding primer. CW-1123 will encapsulate dyes and tannins in 60 minutes.
1123 is easy to sand, fast drying, and has excellent vertical hang. Two coats of this primer is required.
1123 is in stock and ready to ship!
Features:
- Fast drying
- Tintable
- Excellent vertical hang
- Accepts any topcoat
- Water cleanup
- Sands easy - use a low speed
Centurion 1K System Guide:
- Clean the substrate properly with a degreaser and cleaner with an abrasive pads or brush. Then rinse any possible residue with water.
CIC recommends a mix of Naphtha and water or Naphtha and acetone. However simple green, krud cutter, or tsp may be used. - Sand the surface with 150-180 grit.
- Clean any dust with a clean rag and water.
- Apply the first coat of 1123 primer at 4-6 wet mils with a 308 or 310 if you're using airless, or a 1.5-2.2 tip with an HVLP/cup gun. If the surface is open grain wood, we recommend adding 3% Centurion reducer.
- Allow the primer to dry for 1 hour. You will see bleeding in this coat.
- After 1 hour lightly scuff the surface with a fine to very fine sponge by hand, or a 1/2" very fine, or ultra fine sponge on a low speed. Or 320 grit abrasives at a low speed. CIC does not recommend film paper for this product as it can gum the paper. If you wait longer than an hour be sure to scuff the surface before applying your second coat.
- Apply the second coat at 4-6 mils.
- Allow the primer to dry for at least 1 hour. If dry times are exceeding 1 hour be sure to check substrate you are applying it to, temperature it is drying in, coating temperature, and that airflow is moving off gassing water from substrate.
- Scuff second coat of primer with a fine to very fine sponge by hand, a 1/2" very fine or ultra fine sponge at a lowered speed, or a paperback 320 grit abrasive at a lowered speed.
- If attempting to achieve a full grain fill, proceed with another
coat of 1123 following the steps above, or use 1108, 1111, or 1107.
If not, you may proceed with topcoat.
Orders are shipped the same day Monday through Friday when ordered before 1:00PM EST.
Depending on order volume, custom colors may not ship when ordered before 1PM.
Custom color ship dates are updated Monday - Friday and can be found in the announcement at the top of every page.
Many orders will ship the same day after 1:00PM EST but there is a firm cutoff time of 5:30PM. If you want to request overnight shipping or get a delivery estimate, call us at 855-672-0422, or ask on the live chat.
Free shipping on Novalk, Envirolak, and Centurion. All orders over $199 ship free. Click here for more detailed shipping information.
The following products are ground only: TWP deck stain, Arborcoat oil based stain, Simiron epoxy, all 5 gallon pails, tabletop epoxy, dry erase paints, airless paint sprayers, Benjamin Moore deck cleaning products, and all oil based gel/wiping stains.
All items are packed thoroughly to avoid damage.
In January and February, orders to certain areas with material that can freeze will include a large heat pack designed to provide heat for 3-4 days. This time of year delays can happen from UPS/FedEx that are out of our control.
For any questions on shipping or products you can call us at 855-672-0422 start, a live chat session, or send us an email at support@pontiacpaintsupply.com.
We try to respond to emails in 6 hours or less, and have the live chat available as often as possible. Retail store hours are M-F 8AM to 5PM EST. Our address is 1001 Orchard Lake Rd. Pontiac, MI 48341