Centurion 2K Polyurethane Primer is the water based primer you've been looking for! Now available in black (CW-1907).
Centurion 1107 primer is meant for use where extreme chemical and moisture resistance is required. This product requires a 10-15% (by weight) or 10-15% (by volume) mix with CW-4002 hardener to provide a fully crosslinked film.
Great over hard and soft woods, and MDF board.
The high build formula fills wood grain
Blocks tannin bleed though when catalyzed
Can be used on new wood or existing finished wood
Easy to sand
Chemical and moisture resistance
- Can be used without CW-4002 hardener (you will not get the strong adhesion or tannin/stain blocking properties). This is not recommended.
HVLP Turbine: 1.8 - 2.0 needle
Coverage: 750 sq. feet per gallon @ 1 mil
Dry time: Tack free in 20-25 minutes. Sand/Recoat in 45-60 minutes.
Spray application methods: conventional, airless, air assisted airless, HVLP (minimum 4 stage turbine) reduction of 2-5% may be needed.
This primer can be tinted. If we are doing a custom color match, and you want the primer tinted, we will use a quarter or half of that formula for the primer. The color will not match 100% and this is done on purpose.
For dark colors we will tint the primer to a medium gray with 2 ounces of lamp black colorant. 2 ounces is the maximum amount of recommended colorant for this primer. If you have a dark blue or black color, 1907 black is a better choice.
Orders are shipped the same day Monday through Friday when ordered before 1:00PM EST.
Depending on order volume, custom colors may not ship when ordered before 1PM. Current order cutoff time for custom colors is 11AM EST. Custom color order cut off time is updated daily and can be found in the announcement at the top of every page.
Some orders will ship the same day after 1:00PM EST but there is a firm cutoff time of 5:30PM. Accurate estimated delivery dates are shown at checkout for most products.
All orders over $199 ship free. Click here for more detailed shipping information.
The following products are ground only: TWP deck stain, Arborcoat oil based stain, Simiron epoxy, most 5 gallon pails, tabletop epoxy, dry erase paints, airless paint sprayers, Benjamin Moore deck cleaning products, and all oil based gel/wiping stains, topcoats, and paints.
All items are packed thoroughly to avoid damage. We have not had a damaged gallon in all of 2023.
For any questions on shipping or products you can call us at 855-672-0422 start, a live chat session, or send us an email at firstname.lastname@example.org.
We try to respond to emails in less than 1 hour, and have the live chat available as often as possible. Retail store hours are M-F 8AM to 5PM EST and Saturday 9AM to 3PM EST.
I'm painting cabinet doors. Painting over dark blue color and had some unknown spot fisheye on me. When catalyzed, this product covered well; covered the blue and whatever caused the fisheye. I was using Fuji HVLP 1.8MM tip. Product levels well. Great product for a DIYer.